System 55

Push button sensor 3, 3-gang

The push button sensor is attached to a flush-mounted bus coupler. The following software variants are to be programmed with ETS 2:
• Free assignment of the functions switching/pressing, dimming, blinds, value transmitter/light scene auxiliary unit, analogue value transmitter and universal value transmitter EIS 6 to the 6 buttons or 3 rockers
• Status indication via 6 red LEDs possible
• Inscription space illumination ON, OFF, automatic switch-off or switchable via object
• Blocker for blocking individual buttons or rockers
• Alarm message after removal of the flush-mounted bus interface (1 bit/1 byte telegram)
• Switching/pressing function (ON, OFF, SW, no function)
• Dimming with stop telegram and telegram repetition possible
• Single-surface operation for rocker functions (switching/pressing, dimming) possible
• Blind press function (UP/DOWN) and operating concept (STEP - MOVE - STEP or MOVE - STEP) can be set
• Press functions of value transmitter EIS 6 (1 byte) or light scene execution with/without memory function
• Analogue value transmitter (EIS 5 or EIS 10), value adjustment possible by pressing and holding button
• Universal value transmitter EIS 6 for continuous run-through of a value range,
.

• Operating instructions